Page Comparison

• 1 Aries8 unit

• 1 dock 

• 1 power block and power cable

• 2 privacy tabs (for pinpad)

• 1 quick setup guide 

• 1 mounting bracket 

• 2 wing screws

• 3 mounting screws

• 1 cable tie

• 1 alcohol swab

• 1 adhesive ring

• 3 mounting bolts (for adhesive ring)

1. Locate the Aries8 unit and dock

2. Line up the six holes on the back of the Aries8 unit with the 6 tabs on the dock, and slide up to lock to lock into place

3. Route the cable on the back of the dock to the right or left, through the channel

4. Line up the 3 holes at the back of the dock with the 3 tabs on the front of the mounting bracket, and slide downwards

5. Plug the LAN cable into the LAN port

• This can be found on the box coming from the cord attached to the dock

6. Plug in the power cable

Attaching the Adhesive Ring

1. Line up the 3 holes on the bottom of the mount with the 3 pegs on the top of the adhesive ring

2. Use the 3 bolts (from the bag) to attach the adhesive ring, screw them in from the top of the bottom part of the mount

3. To tighten the base to prevent swiveling, use a screwdriver to tighten the horizontal screw located in the photo to the right