Page Comparison

Step 1: Unpacking

1. Unpack the unit

2. Included with the SpotOn Terminal will be the following:

   • AC Power Supply

   • USB to Micro USB Cable

   • Thermal Paper Roll

Step 2: Power

1. Insert the USB end of the USB to micro USB cord into the AC power supply

2. Insert the micro USB connector into the micro USB port on the left side of the SpotOn Terminal

3. Chargethe battery until full (Approx. 1-2 hours)

4. Power on the terminal once the battery is fully charged

The SpotOn Terminal supports WiFi for network and internet access. To enable and connect to WiFi:

1. Swipe down from the top of the touch screen, and tap the notifications bar to access the quick settings menu

2. Tap WiFi

   • This will enable WiFi on the device and display available WiFi networks

3. Select desired WiFi network

4. Enter networkpassword, then tap Connect

   • Connection successful if “Connected” displays under the selected WiFi name