Adding Clerk/Server | TransIT App

Owned by Will Castleberry
Last updated: Oct 21, 2021
1 min read

Quick Links

Enable Server/Clerk Mode

  1. Open TSYS TransIT App

  2. Select FUNC from the Tender banner

  3. Select Settings

  4. If prompted, enter device password (either "9876" or the current date in eight digits, i.e. "10192021" for October 19th, 2021) and press Enter

  5. Select Merchant Settings

  6. Scroll down to Clerk/Server ID Prompt and tap on the slider button to Enable

  7. Press the < button in the upper-left corner of the screen until you return to the terminal screen

Adding Clerks/Servers

  1. Open TSYS TransIT App

  2. Select FUNC from the Tender banner

  3. Select Operator

  4. If prompted, enter device password (either "9876" or the current date in eight digits, i.e. "10192021" for October 19th, 2021) and press Enter

  5. Select Add Operator

  6. Enter Operator Name and Operator ID (server number)

  7. Press CONFIRM

  8. Press OK to continue adding Clerk/Servers, or press Cancel to complete adding entries

Note: Clerk/Server IDs will need to be re-added if TransIT app on the device is updated