Operation Settings | PAX S80

Owned by Will Castleberry
Last updated: Jan 16, 2021 by Rebecca Buesseler (Deactivated)
2 min read

Quick Links

To turn off Buzzer/Beeping Sound

  1. Press Menu

  2. Press 3 for Operation Settings

  3. Press 2 for Buzzer Setup

  4. Press 1 for Buzzer Setup (again)

  5. Press 1 for Off

To change/remove the Card Remove Beep

  1. Press Menu

  2. Press 3 for Operation Settings

  3. Press 2 for Buzzer Setup

  4. Press 2 for Card Remove Beep

  5. Select the desired setting:

    • 1- No Beep

    • 2 - One Beep

    • 3 - Continuous Beep

To change/turn off Demo Mode

Before turning demo mode on or off, the terminal must be settled/batched out.

Do not turn on demo mode if you wish to run live transactions. Demo Mode does not approve or decline transactions online.

  1. Press Menu

  2. Press 3 for Operation Settings

  3. Press 3 for Operation Mode

  4. Key-in the password (today's date- MMDDYYYY) and then press Enter

  5. Press 1 for Normal Mode or 2 for Demo Mode

  6. Press Enter to confirm selection

To disable/enable No-Paper Mode

  1. Press Menu

  2. Press 3 for Operation Settings

  3. Press 1 for No-Paper Mode

  4. Key-in the password (today's date- MMDDYYYY) and then press Enter

  5. Select the desired Mode:

    • 1 - Off

    • 2 - On (This enables processing without receipt paper installed)

    • 3 - Auto (This mode will allow the transaction to still process when the paper is out; but print receipts when paper is properly installed.

  6. Press Enter to confirm selection

To set a Halo (Maximum Amount)

The Set Halo option sets a transaction amount limit that cannot be exceeded. This option can be set for all types of sales/returns and for cash back on debit transactions.

  1. Press Menu

  2. Press 3 for Operation Settings

  3. Press 5 for Halo Setup

  4. Key-in the password (today's date- MMDDYYYY) and then press Enter

  5. Press 2 for ON

  6. Key-in the desired halo amount for a Sale and press Enter